The ALL-11 programmers will program just about every type of device with a programmable memory or configuration including EPROM, EEPROM, FLASH, PLD/CPLD/FPGA, microcontrollers, BPROM, Serial PROM, and much more.

A full list available here

There are currently three variants of this programmer. This version the ALL-11C(2) has a fixed 40 pin DIL socket. The ALL-11C(2) and ALL-11P(2) have both serial and parallel ports to connect to the PC.

The software interface is a native Windows application and is compatible with Windows 95/98/2000/NT and XP. The ALL-11 includes a high speed CPU and features the latest SMD SIMM module pin driver circuits which provide extremely accurate programming waveforms, high speed, high reliability and a compact form factor. ALL-11 pin drivers are fully programmable to support programming and testing of standard and low voltage devices. The ALL-11 is powerful enough to perform demanding production tasks and compact enough to use for field engineering work.

ALL-11 Supports Over 3000 IC

The ALL-11 supports an expansive array of EPROM, EEPROM, FLASH, Serial PROM, BPROM, MPU/ MCU/ DSP, microcontrollers from Atmel, Dallas, Hitachi, Intel, Microchip, Mitsubishi, Motorola, NEC, Philips, TI, Toshiba, WSI, Zilog and others.

The ALL-11 supports PAL, GAL, PEEL, EPLD, EPL, FPGA, CPLD from Altera, AMD, Atmel, Lattice, Lucent Technologies (AT & T), Motorola, TI, Xilinx, etc... The ALL-11 can perform functional vector tests on programmable logic devices as fast as 4ns.

Devices supported range from 8 pins to over 300 pins. Nearly all devices with 8-40 pins can be programmed directly by the ALL-11's 40 pin DIP socket. Adapters & convertors are available to support nearly every type of IC package including PLCC, SOP, TSOP, QFP, TQFP, PGA, SOJ, and much more. Gang programming options are available for E/EPROM, FLASH, Serial PROM, PLD/CPLD, and microcontrollers.

ALL-11 Is Easy To Operate

The ALL-11's Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. The Auto function displays all available functions that can be performed on the device (i.e. blank check, program, verify, program security, protect sectors, etc...). Simply check off the operations you want to perform. After all desired functions are selected the programmer can be operated by a single external key on the programmer.

The ALL-11 can process all popular file formats including Intel HEX, Motorola S-records, binary ,.JEDEC fuse map (.JED), Altera POF, and others. A full screen editor is provided to view or edit any address of the programming buffer in binary, ASCII, or Logic Fuse Map formats.

ALL-11 Is Reliable

The ALL-11 is a sixth generation universal programmer product. HiLo have over 10 years experience designing universal programmers and have an installed base of over 100,000 universal programmers. Close relations with all major IC manufacturers keep the engineers well informed of all the latest programming algorithm releases. The algorithms have been tested and approved by AMD, Atmel, ICT, Macronix, Motorola, National Semiconductor, WSI and others. Over current protection circuits and reverse insertion detection protect your IC and the ALL-11. A self diagnostic test is included to verify correct operation of the hardware and to meet calibration requirements. The ALL-11 meets CE requirements and has been approved by TUV. Every ALL-11 is backed by a 1 year hardware warranty.

ALL-11 Backed By Worldwide Service And Support

BBS ( 886-2-7690881 ), WEB ( http//:www.hilosystems.com), or email. Over 30 engineers are available to answer technical support questions and add support for new device types. New device support is added daily to keep up with all of your programming requirements.

Electronic Specifications

• Includes high speed CPU and 1Mbit memory buffer as standard.
• High Speed and compact pin driver circuits to support programming and testing of standard and low voltage IC. Connection to the PC is either via the USB interface or the high speed parallel port interface (up to 130 kbytes/sec) which works in ECP or EPP mode. This reduces driver and data download time to a negligible amount. The slower serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or COM4).

Function Specifications

Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, File Transfer, Function Configuration, Self Test.

Electrical Requirements

• Operating Voltage: 90 - 245 VAC
• Frequency Range: 47-67 Hz
• Power Consumption: 5V max 1A 12V max 1.5A

Physical and Environmental Specifications

• Dimensions: 245 mm X 220 mm x 50 mm
• Weight: 2kg
• Temperature: 0 - 40 ?C (50 - 105 ?F)
• Safety Standards: approved by TUV to meet CE requirements

Host System Requirements

• Any IBM or compatible 486/Pentium with a minimum 32MB extended memory.
• At least one serial port (or USB port for ALL-11P(3)) or parallel port
• 5 MB of free hard disk space
• Windows 95/98/ME/2000/NT/XP operating system